Product Comparisons

Cloud RSI Platforms vs Hardware Interpreter Booths: Choosing In-Venue Interpretation Equipment in 2026

By the SmartMeet team · · 7 min read

Choose a cloud RSI platform when your audience can reliably listen on their own phones or laptops over the venue Wi-Fi, and choose hardware interpreter booths with IR or RF receivers when the room is large, the network is uncertain, or protocol calls for dedicated equipment. Many events in 2026 sit in between: interpreters work in physical booths on site, and the same interpretation also reaches remote viewers through a cloud platform. The right answer depends on the room, not on which technology is newer.

This guide is about the equipment decision inside the venue. If you are comparing the overall budget of remote and on-site interpretation, read our RSI vs on-site cost comparison first. For the wiring between the venue mixer and the online meeting, see the hybrid event AV guide.

Two ways to get interpretation to the ear of a delegate

Every interpreted event has the same chain: the speaker's voice reaches the interpreters, the interpreters speak into their own microphones, and each listener hears the language they chose. What differs is the equipment at each step.

Hardware booths
  1. Room microphones
  2. Interpreter console in a physical booth
  3. IR or RF transmitter
  4. Receiver and headset per delegate
Cloud RSI, BYOD
  1. Room microphones or speaker's device
  2. Interpreter in a virtual booth
  3. Cloud platform channel
  4. Delegate's own phone and earphones

With hardware, the venue's AV supplier owns the whole chain and you rent receivers for every seat that needs interpretation. With cloud RSI, the platform carries the channels and each delegate joins from their own device and picks a language from the menu. This is often called BYOD interpretation, or interpretation without receivers.

When listening on phones works well

Interpretation without receivers is a good fit when most of these are true:

  • The in-room audience is moderate in size and the venue Wi-Fi has been tested with that many devices streaming audio at once.
  • The event is already hybrid, so a cloud platform is running anyway for remote speakers or viewers.
  • Interpreters are not all in the city. A virtual booth lets you book the best interpreter for a language pair wherever they are based.
  • Delegates are comfortable with their phones, and you can hand out simple wired earphones at registration for anyone who forgot theirs.
  • You want the same interaction for everyone. On the platform, people in the room and online can use the same Q&A panel and polls.

Remember that every phone in the room that joins the meeting counts as a participant. On SmartMeet, the Business plan allows up to 300 participants and 10 interpretation channels, so plan the in-room and online audience together against that limit.

When hardware interpreter booths still win

Physical booths and receivers are not outdated. They remain the safer choice when:

  • The in-room audience is large and the venue cannot guarantee Wi-Fi for every seat. A dedicated IR or RF system does not depend on the guest network.
  • The event is formal or diplomatic, and protocol expects delegates to find a receiver at their seat rather than set up a phone.
  • Sessions run all day. Phones run out of battery; receivers are charged by the AV team between sessions.
  • Interpreters need to see the room directly, for example in a fast debate with many speakers, voting procedures or a plenary with interventions from the floor.
  • Your contract or venue requires booths to a recognized standard. ISO 2603 covers permanent booths and ISO 4043 covers mobile booths; your AV supplier can confirm which applies.

Professional bodies such as AIIC publish guidance on working conditions for conference interpreters, and it is worth sharing with your venue before deciding.

The hybrid mixes most events actually use

The choice is rarely all or nothing. Three combinations come up again and again in hybrid conference AV planning:

1. Booths on site, cloud for remote viewers

Interpreters sit in physical booths and the room listens on receivers as usual. Each interpreter's output is also sent into the cloud platform, so remote attendees hear the same interpretation on their language channel. This keeps the in-room experience traditional while extending it online.

2. Remote interpreters, venue sound system

Interpreters work from virtual booths, and the venue takes the interpreted channels back from the platform into its own distribution system or the PA. Useful when the right interpreters are abroad but the room still uses receivers.

3. Fully cloud, in the room and online

Interpreters are remote, and everyone, in the room and online, listens on their own device. The venue only needs to send a clean floor feed into the meeting so the interpreters hear the room microphones.

Decision table by event scenario

ScenarioBetter fitWhy
Board meeting, 20–40 people, one roomCloud RSI, BYODSmall audience, simple network load, no receivers to manage
Training day with online participantsCloud RSI, BYODSame channels, polls and Q&A for both audiences
Large plenary in a ballroomHardware boothsToo many devices for most guest Wi-Fi; receivers are predictable
Diplomatic or protocol-heavy forumHardware booths, plus cloud for remote viewersDelegates expect receivers; remote audience still covered
Rare language pair, interpreter abroadRemote interpreter into venue systemAvoids travel while the room keeps receivers
Multi-day summit with breakoutsMix: booths in plenary, cloud where usefulEach room is planned on its own constraints

One note on breakouts: SmartMeet interpretation booths work in the main room, not in breakout rooms. If a parallel session needs interpretation, run it as its own meeting with its own booths.

In-venue BYOD checklist

If you choose interpretation without receivers for the room, run through this list with your venue and AV team:

  1. Test the Wi-Fi under load. Ask the venue how many simultaneous devices the network supports, then test with real phones streaming audio during the rehearsal, not an empty room.
  2. Give in-room listeners a separate network or bandwidth from the production team, so the floor feed and the interpreters are not competing with the audience.
  3. Hand out earphones at registration. Phone speakers in a conference room cause noise and echo; simple wired earphones solve it.
  4. Put the join link on signage and on screen, with one line in each language explaining how to open the language menu and pick a channel.
  5. Send a clean floor feed into the meeting from the venue mixer, so interpreters hear the room microphones rather than a phone on the lectern.
  6. Ask in-room attendees to keep their device microphones muted. Use mute all at the start if needed, and take floor questions through the room microphones.
  7. Have a help desk near the entrance for people who cannot connect, and a small stock of receivers or spare devices if the event is important enough to need a fallback.

For the interpreters' side of the setup, our virtual interpreter booth setup guide covers headsets, connections and handover between booth partners.

What the platform gives the interpreters

In a cloud setup, the virtual booth replaces the physical console. In SmartMeet, interpreters can request and accept a handover with their booth partner, send private messages to each other, use relay from another booth, and look up terms in the glossary on the Business plan. Interpreters can also join as guests from a link, without an account. As with any platform, the organizer books the interpreters; SmartMeet provides the booths and channels, not the people.

If you need a record afterwards, recording is available on the Starter plan and above, as one video file of the meeting rather than a file per language. Live captions show each speaker's words in the language they spoke, and the transcript can be downloaded afterwards. Make a short test recording before the event to check it holds what you need.

Frequently asked questions

Can attendees in the room listen to interpretation on their own phones?

Yes, if the venue Wi-Fi can carry that many devices. Each attendee joins the meeting, picks a language channel and listens through earphones, with no receiver needed.

When should I still rent IR receivers and physical booths?

For large in-room audiences, uncertain venue networks, long full-day sessions and formal or diplomatic events where delegates expect a receiver at their seat.

Can interpreters in physical booths also serve a remote audience?

Yes. The booth output can be sent into the cloud platform, so remote attendees hear the same interpretation on their language channel while the room uses receivers.

Do in-room phones count toward the participant limit?

Yes. Every device that joins the meeting is a participant. On SmartMeet the Business plan allows up to 300 participants, so plan the room and online audience together.

Which standards apply to interpreter booths?

ISO 2603 covers permanent booths and ISO 4043 covers mobile booths. Ask your AV supplier which one your venue and contract require.

  • Cloud RSI
  • Interpreter Booths
  • BYOD Interpretation
  • Hybrid Conference AV
  • Event Equipment

More articles